Communicate with Supplier? Supplier
Thea Ms. Thea
What can I do for you?
Chat Now Contact Supplier
ZhongFeng Electronic Technology Co., Limited

ZhongFeng Electronic Technology Co., Limited

sales2@zfpcba.com

86-0755-23218920

ZhongFeng Electronic Technology Co., Limited
HomeProductsPCBFlex-Rigid PCB

Flex-Rigid PCB (Total 27 Products)

Product categories of Flex-Rigid PCB, we are specialized manufacturers from China, Flex-Rigid PCB, Multilayer Rigid-Flex PCB suppliers/factory, wholesale high-quality products of Rigid Flex PCB R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

China Flex-Rigid PCB Suppliers

Flex-Rigid PCB, it's the PCB that part of it is rigid and part of it is flex. It combine flex PCB and rigid PCB in a same PCB together and we call it flex-rigid PCB or rigid-flex PCB. Normally, the rigid PCB area is for soldering electronic components and the flex PCB area would be taken as cables to connect rigid PCB areas together, this could make the rigid-flex PCB perfectly suit for a wide range of applications.

PCB = Printed Circuit Board and PCBA = Printed Circuit Board Assembly. For PCB, it means the copper circuits be printed on a board, and so the main composition of PCB are copper and board.

The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.

The PCB Board could be rigid PCB, could be flex PCB and also could be flex-rigid PCB. And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.

We are the one-stop shop for all kinds of PCB manufacture service from PCB Prototype to big volume, which could save our customers a lot of time and money.

PCB Manufacture Capabilities

Features

Capabilities

Layers

1-36 layers

Material

FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc.

PCB Type

FR-4 Standard PCB , Aluminum PCB, Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick Copper PCB and Rogers PCB, etc.

Board Thickness

0.1mm-6.0mm

Copper Thickness

1/2oz-6oz(18um-210um)

Biggest Board size

600mm*1200mm

Min Tracing/Spacing

0.075mm/0.075mm (3mil/3mil)

Min drilling Hole diameter

0.15mm(6mil), 0.1mm(4mil)-laser drill

Solder Mask

Green, Black, White, Red, Yellow, Blue and Purple, etc.

Silkscreen color

White, Blue, Black, Red, Yellow

Surface finish

HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc.

Special Techniques

Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc.


PCB Products Show


PCB Boards_1


PCB Factory Show


Yifang PCB Factory